DV-300 Desktop Mail Parcel Color X-ray Scanner
DV-400A Conveyorized Compact Parcel X-ray Scanner
DV-910 Conveyorized Parcel X-ray Scanner
DV-911 LARGE CAPACITY X-RAY SCANNER
DV-925A CONVEYORIZED CHECKED BAGGAGE X-RAY SCANNER
MAIL-GUARDIAN TABLE-TOP X-RAY SCANNER (NON-CONVEYORIZED)
LETTER BOMB DETECTOR - Small desktop Mail Bomb Scanner which works like a ultra-sensitive metal detector and is used as a first line of defense for detecting possible metallic items which have been known to be used in mail bombs.
DV-300 Desktop Mail Parcel Color X-ray Scanner
Employs the latest digital color airport screening technologies, which have proven so effective for air travel, governments and larger corporate facilities. Provides for a very real and cost effective deterrent, boosting confidence in the protection of your valued professionals.
Get a much brighter and clearer picture than monochrome fluoroscopic scanners, without corner cutoff due to folded array design. More positive and effective than metal detection for modern detonators and explosive devices.
The 300 is completely film safe with ultra low dose to scan mail parcels, unlike many other scanners. With its convenient controls and low profile desktop design make the DV 300 very user friendly.
The only subcompact scanner with a generous compartment to handle higher throughput and scanning capabilities and greater parcel size and weight.
Advanced, high contrast image, featuring selectable color, high resolution and automatic edge enhancement, automatic threat alert, 2x and 4x zoom and superior package penetration.
Made in the U.S.A. with the professional reliability and world wide service one expects from a former division of PhilipsŪ with unsurpassed (over 60 years) security screening experience.
Physical Details
Dimensions of inspection chamber (maximum object size):
400 L x 330 W x 203 H mm
15.5" L x 13" W x 8" H
Maximum weight of object: Unlimited
Article penetration capability: 4mm of steel minimum, 6mm typical
Wire delectability: 38 awg (0.10mm) typical
Monitor Contrast: 256 gray levels
X-ray dose per inspection (typical): Approx. 0.1 mrem (1 micro m Sv)
Film safety: Guaranteed for high-speed films up to ISO 1600 (33 DIN)
Duty cycle: 100% no warm-up procedure required
X-ray Generator
Anode voltage: 90 kV cp tube operates at 55 kV cp in a sealed oil bath for cooling.
Tube Current (typical): 0.1 mA
Beam divergence - beam direction: 80 degrees - diagonal
Imaging Detectors: L-shaped detector array
Image features: Dynagraphy Color, Auto Threat Alert, Edge Enhance, Scan Dark and Light , Variable Scanning, High resolution mode and High Dense enhancements. Electronic auto zoom magnification, two and four fold.
Image evaluation functions: 14" color monitor with high-resolution (flicker-free 70 Hz) emission, meets MPR II standard, 15" or 17" optional; LED x-ray "on" indicators for lower maintenance.
Additional Features
Options:
Remote control via cable PC interface
Larger monitors
Lockable monitor hood or keypad
Power conditioners
Installation Data
X-ray leakage: Meets all applicable radiation protection and health regulations with respect to x-ray emitting devices. Radiation leakage far below 5/Sv/h (0.5 mrem/h). Typical values less than 1 micro m Sv/h (0.1 mrem/h) at a distance of 5 cm from external housing. Meets USBRH Standards, 21 CRF 1020.408.
CE labeling: Complies with "Machines" guidelines (89/392/EWG) meets IEC 348 and FCC 20780 Standards for electronic and electromagnetic compatibility.
Operating (storage) temperature, humidity: 0°C - 40°C (-20°C - 60°C) • 10% - 90% (non-condensing)
Power Supply: 230 VAC +/- 10% • 50 Hz / 60 Hz +/- 3 Hz; 110 VAC / 60 Hz +/- 3 Hz
Power Consumption (without monitor): Approx. 50 VA (standby); approx. 70 VA (during inspection cycle)
Dimensions & weight: 72 L x 445 W x 393 H mm • approx. 83kg. • 28" L x 17.5" W x 15.5" H • approx. 185 lbs.
Mechanical construction: Uni.-body steel construction with stainless steel command center
Standard color: PC Beige
Compliance Information
Complies with the U.S. Federal Aviation Administration Standards "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26; the system conforms to the USBRH Performance Standards for Cabinet X-ray Systems (21 CRF 1020.40).
Emergency stop buttons at either end of the unit conform to ANSI standard B20.10 for Conveyor Safety. Cluster LED X-Ray "ON" indicators for lower maintenance. The electrical system conforms to applicable sections of IEC 348 for Electrical Safety and FCC Docket 20780 for electromagnetic capability. (top of page)
DV-400A conveyorized compact parcel x-ray scanner (top of page)
Inspection Capability
Tunnel Size: 25.25" wide (641 mm)
15" high (381 mm)
L-shaped detector for 100% package screening
Material Penetration in Dynagraphy:
.38" (9.5 mm) minimum
Contrast Sensitivity:
256 gray tones
Resolution:
#38 AWG wire. (30 AWG through 7th step of ASTM step wedge)
Will image thin items, such as magazines or courier envelopes.
*Patented auto scan without photo sensors: elimination of infrared
sensors assures all packages and envelopes are scanned, no
matter how thin.
Conveyor Speed:
48 feet per minute at 60hz
(14.4 meters per minute at 50hz.)
Reverse capability included.
X-Ray Generator
Self-contained tube head
Operating voltage: 90 kV maximum
Duty Cycle: 100% with sealed oil bath cooling
Beam orientation: diagonal
Dose rate per exam: .1 mR typical
X-Ray Detector
Board mounted, fully integrated, high frequency, solid state detectors
using a high speed 12-bit analog-to-digital converter with 50 MHz
digital signal processing for ultimate picture quality. No detector skipping.
Operator Controls
Command Center Functions:
Scan enhancement
Dark enhancement
Light enhancement
2x and 4x zoom
Automatic threat alert highlighting
Color-On/Off
High/low density settings
Reversible conveyor direction
Available with auto zoom and edge enhancement
High resolution mode
Heavy duty switches
High penetration
Physical Details
Dimensions: see drawing (I will put this on later)
Weight: 650 lbs. (295kg)
900 lbs. (408kg) crated
Construction:
Uni-body heavy gauge steel cabinet with parcel collector.
Stainless steel control console.
Portability:
Optional cart welded steel construction with 5" roller
bearing lockable wheels.
Environmental Conditions:
Temperature range: 32 to 113 F
0 to 45 C. Humidity 20-95%, non-condensing
Electrical Power Requirements:
Consumption: < 500VA
100,120 volts AC +/- 10%, < 5 amps.
200, 220, 240, 250 volts AC +/- 10%,
<2.5 amps. All at 50 or 60Hz.
Custom Options
Dual energy (DE) color organic and inorganic material identification with organic / inorganic feature
Power conditioning units
Foot and hand switches
Remote operation
Tropical kit
Locking stainless steel console cover
Locking monitor hood
Larger monitors
Heavy duty stainless visors
Rental or lease
Stainless steel loading and exit trays
Compliance Information
Complies with the U.S. Federal Aviation Administration Standards "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26; the system conforms to the USBRH Performance Standards for Cabinet X-Ray Systems (21 CRF 1020.40).
Emergency stop buttons at either end of the unit conform to ANSI standard B20.10 for Conveyor Safety. Cluster LED X-Ray "ON" indicators for lower maintenance. The electrical system conforms to applicable sections of IEC 348 for Electrical Safety and FCC Docket 20780 for Electromagnetic capability. (top of page)
DV-910 conveyorized parcel x-ray scanner- is a compact, heavy duty conveyorized x-ray security screening system designed for the inspection of carry on luggage, briefcases, purses, mail trays, and parcels. Great for airports, seaports, court, hospitals, corporate facilities, government Buildings, mailrooms and receiving rooms, corrections, nuclear power plants, special events. (top of page)
Inspection Capability
Tunnel Size: 25.5" wide (648 mm) 20" high (513 mm)
L-shaped detector array for 100% package screening
Standard conveyor pictured above.
(910 Extended conveyor length
Model 910E (30" entrance and 60"
exit bed length for 132" L overall).
Penetration: 17 mm cold rolled steel
typical in Dynagraphy. 27 mm
typical with optional scintillation
crystals.
Contrast sensitivity: 256 gray tones
Resolution: #38 AWG wire of ASTM (#30
AWG through 7th step (step-wedge)
Conveyor Speed:
48 feet per minute at 60hz
(14.4 meters per minute at 50hz.)
Reverse capability included.
Auto scan without photo-sensors.
Toggles for easy belt maintenance.
Conveyor extension ends fold up -
making it easy to fit in an elevator.
X-Ray Generator
Self-contained shielded tank
High voltage rating: 160 kV
Operating voltage: 140 kV
Duty Cycle: 100% with sealed oil bath cooling
Beam orientation: diagonal
Dose rate per exam: 0.1 mR typical
X-Ray Detector
Board mounted, fully integrated, high frequency, solid state detectors (680 active)
using a high speed 12-bit analog-to-digital converter with 40 MHz
digital signal processing for ultimate picture quality.
Operator Controls Command Center Functions:
Scan enhancement
Dark enhancement
Light enhancement
Negative/Positive Image
Data Elimination
2x and 4x zoom
Automatic threat alert highlighting
Color-On/Off
High/low density settings
Reversible conveyor direction
Available with auto zoom and edge enhancement
High resolution mode
Stainless steel with command center heavy duty switches
High penetration
Physical Details
Dimensions: see drawing
Weight: 890 lbs. (404kg)
1200 lbs. (544kg) crated
Construction:
Cantilevered frame, powder coated, heavy gauge
steel cabinet on casters with leveling jacks. Stainless
steel keypad mountable on side, top or optional remote
cart or desk. Substantial stainless trims, especially on
the Model 910E extended conveyor model.
Environmental Conditions:
Temperature range: 32 to 113 F
0 to 55 C. Humidity 20-80%,
non-condensing
Electrical Power Requirements:
Consumption: < 1KVA
120 volts a/c. +/- 10% (10 amps)
220 volts a/c. +/- 10% (5 amps)
Custom Options
Dual energy (DE) color organic and inorganic material identification with organic / inorganic stripping feature
Power conditioning units
Foot and hand switches
Remote operation
Tropical kit
Locking stainless steel console cover
Locking monitor hood
Roller bed extensions
Conveyor extensions
Custom colors / powder coatings
Scintillation crystals
Compliance Information
Complies with the U.S. Federal Aviation Administration Standards "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26; the system conforms to the USBRH Performance Standards for Cabinet X-Ray Systems (21 CRF 1020.40).
Emergency stop buttons at either end of the unit conform to ANSI standard B20.10 for Conveyor Safety. Cluster LED X-Ray "ON" indicators for lower maintenance. The electrical system conforms to applicable sections of IEC 348 for Electrical Safety and FCC Docket 20780 for electromagnetic capability. (top of page)
DV-911 LARGE CAPACITY X-RAY SCANNER - for the inspection of carry-on bags, most checked luggage, purses, mail-trays, medium sized freight and parcels. Large items are no problem for its tunnel opening of . (see below) (top of page)
Inspection Capability
Tunnel Size: 29.6" wide (750 mm)
21.7" high (551 mm)
L-shaped detector array for 100% package screening
Standard conveyor pictured above.
(911 Extended conveyor length
Model 911E (30" entrance and 60"
exit bed length for 132" L overall).
Penetration: 17 mm cold rolled steel
typical in Dynagraphy. 27 mm
typical with optional scintillation
crystals.
Resolution: #38 AWG wire of ASTM (#30
AWG through 7th step (step-wedge)
Conveyor Speed:
48 feet per minute at 60hz
(14.4 meters per minute at 50hz.)
Reverse capability included.
Toggles for easy belt maintenance.
X-Ray Generator
Self-contained shielded tank
High voltage rating: 160 kV
Operating voltage: 140 kV
Duty Cycle: 100% with sealed oil bath cooling
Beam orientation: diagonal
Dose rate per exam: 0.1 mR typical
X-Ray Detector
Board mounted, fully integrated, high frequency, solid state detectors
using a high speed 12-bit analog-to-digital converter with 40 MHz
digital signal processing for ultimate picture quality.
Operator Controls
Command Center Functions:
Scan enhancement
Dark enhancement
Light enhancement
Negative/Positive Image
Data Elimination
2x and 4x zoom
Automatic threat alert highlighting
Color-On/Off
High/low density settings
Reversible conveyor direction
Available with auto zoom and edge enhancement
High resolution mode
Stainless steel with command center heavy duty switches
High penetration
Physical Details
Dimensions: see drawing
Weight: 1210 lbs. (550kg)
1540 lbs. (700kg) crated
Construction:
Cantilevered frame, heavy gauge
steel cabinet on casters with leveling jacks. Stainless
steel command center mountable on side, top or optional remote cart.
Environmental Conditions:
Temperature range: 32 to 113 F
0 to 45 C. Humidity 20-80%,
non-condensing
Electrical Power Requirements:
Consumption: < < 500VA
100, 120 volts a.c. +/- 10% (< 5 amps)
200, 220, 240, 250 volts a.c. +/- 10% (< 2.5 amps) All at 50 or 60 Hz.
Custom Options
Dual energy (DE) color organic and inorganic material identification with organic / inorganic stripping feature
Power conditioning units
Foot and hand switches
Remote operation
Tropical kit
Locking stainless steel console cover
Locking monitor hood
Roller bed extensions
Conveyor extensions
Custom colors / powder coatings
Scintillation crystals
17" or 21" monitor
Dual monitors
Compliance Information
Complies with the U.S. Federal Aviation Administration Standards "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26; the system conforms to the USBRH Performance Standards for Cabinet X-Ray Systems (21 CRF 1020.40).
Emergency stop buttons at either end of the unit conform to ANSI standard B20.10 for Conveyor Safety. Cluster LED X-Ray "ON" indicators for lower maintenance. The electrical system conforms to applicable sections of IEC 348 for Electrical Safety and FCC Docket 20780 for electromagnetic capability. (top of page)
DV-925A CONVEYORIZED CHECKED BAGGAGE X-RAY SCANNER - is a heavy duty conveyorized x-ray scanner designed for the inspection of cargo, large checked baggage, large packages, trucks, and other oversize articles. (top of page)
Inspection Capability
Tunnel Size: 40" wide (1000 mm)
40" high (1000 mm)
L-shaped detector array for 100% package screening
Penetration: 17 mm cold rolled steel
Contrast sensitivity: 256 gray tones
Resolution: #38 AWG wire @ 100% detection (30
AWG wire through 10th step of FAA
Step-wedge).
Conveyor Speed:
48 feet per minute at 60Hz
(14.4 meters per minute at 50Hz.)
Reverse capability included.
Auto scan without sensor eyes.
Toggles for easy belt maintenance.
X-Ray Generator:
Self-contained shielded tube head
High voltage rating: 160 kV
Operating voltage: 140 kV
Duty Cycle: 100% with sealed oil bath cooling
Beam orientation: diagonal
Dose rate per exam: 0.1 mR typical
Auto tube warm-up routine.
Variable kV selection.
X-Ray Detector
Board mounted, fully integrated, high frequency, solid state detectors (1120)
using a high speed 12-bit analog-to-digital converter with 40 MHz
digital signal processing for ultimate picture quality. No detection skipping.
Operator Controls Command Center Functions:
Scan enhancement
Dark enhancement
Light enhancement
2x and 4x zoom
Automatic threat alert highlighting
Color-On/Off
High/low density settings
Reversible conveyor direction
Available with auto zoom and edge enhancement
High resolution mode
Stainless steel with command center heavy duty switches
High penetration
Physical Details
Dimensions: see drawing (I will put this on later)
Weight: 1600 lbs. (726kg) 1900 lbs. (862kg) crated
Construction:
Cantilevered frame, powder coated, heavy gauge
steel cabinet on casters with leveling jacks. Stainless
steel keypad mountable on side, top or optional remote
cart or desk.
Environmental Conditions:
Temperature range: 32 to 113 F
0 to 55 C. Humidity 20-80%,
Non-condensing
Electrical Power Requirements:
Consumption: < 1KVA
120 volts a/c. +/- 10% (10 amps)
220 volts a/c. +/- 10% (5 amps)
Custom Options
Dual energy (DE) color organic and inorganic material identification with organic / inorganic stripping feature
Power conditioning units
Foot and hand switches
Remote operation
Tropical kit
Locking stainless steel console cover
Locking monitor hood
Roller bed extensions
Conveyor extensions
Custom colors / powder coatings
17" monitor available
Remote display console or desk
Locking monitor hood
Rent or lease
Compliance Information
Complies with the U.S. Federal Aviation Administration Standards "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26; the system conforms to the USBRH Performance Standards for Cabinet X-Ray Systems (21 CRF 1020.40).
Emergency stop buttons at either end of the unit conform to ANSI standard B20.10 for Conveyor Safety. Cluster LED X-Ray "ON" indicators for lower maintenance. The electrical system conforms to applicable sections of IEC 348 for Electrical Safety and FCC Docket 20780 for electromagnetic capability. (top of page)
Mail-Guardian -table top X-ray scanner with direct view, fluoroscopic. Non-conveyorized. Powerful kV generator which is safe and effective. It can screen multiple items simultaneously. (top of page)
X-Ray Generator Capability:
150 Kilovolt Peak, 5 Millie-amperes maximum
Sealed, oil and air-cooled
Compartment Size
(Also refer to dimensions image)
13" (330 mm) High
29" (735 mm) Wide
27" (685 mm) Deep
Viewing Method
High resolution video monitor
8x zoom magnification
Monitor sizes 12" to 20"
Inspection Screen Size
25.5" (650 mm) x 28.5" (725 mm)
Resolution
#36-38 AWG Copper wire
Inherent Filtration
1.6 mm Beryllium
Input Voltage and Power Requirements
110-130 volt or 210-250 volt, (Specify voltage when ordering)
single phase AC, 50/60 Hertz, under 850 watts
Overall Size and Weight
(Also refer to dimensions image)
74" (1880 mm) high
40" (1015 mm) wide
28.5" (725 mm) deep
1300 lbs. (590 kg)
Radiation Safety
Dual Safety interlocks
Foot and Panel operating switches
Lockable power switch
Meets or exceeds Federal Standard 21 CFR 1020.40
Meets all applicable International Radiation Standards
Compliance Information
Complies with the U.S. Federal Aviation Administration Standards "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26; the system conforms to the USBRH Performance Standards for Cabinet X-Ray Systems (21 CRF 1020.40).
Emergency stop buttons at either end of the unit conform to ANSI standard B20.10 for Conveyor Safety. Cluster LED X-Ray "ON" indicators for lower maintenance. The electrical system conforms to applicable sections of IEC 348 for Electrical Safety and FCC Docket 20780 for Electromagnetic capability.
X-Ray Generator Capability:
Rated 90 kV cp. peak, high reliability, high frequency X-Ray generator.
Current: 1 mA maximum
Cooling: Sealed oil bath, air
Compartment Size
20" (508 mm) Wide
17" (432 mm) Deep
12.5" (317 mm) High
Door: 16.5" (419 mm) Wide
Viewing Method: Direct view fluoroscopic
Fluoroscopic Inspection Screen Size
17" (432 mm) x (17" (432 mm)
The full screen area is imaged.
Resolution:
#36-38 AWG Copper wire
Input Voltage and Power Requirements
110-130 volt or 210-250 volt, (Specify voltage when ordering)
Single phase AC, 50/60 Hertz, under 250 watts
Overall Size and Weight
30.5" (755 mm) high
22" (559 mm) wide
23" (584 mm) deep
350 lbs. (159 kg)
400 lbs. (182 kg) crated
Radiation Safety
Dual Safety interlocks
Panel operating switch
Lockable power switch
Meets or exceeds Federal Standard 21 CFR 1020.40
Meets all applicable International Radiation Standards
Custom Options
Transport Cart
Rental or lease
Extended Warranty
Compliance Information
Complies with the U.S. Federal Aviation Administration Standards "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26; the system conforms to the USBRH Performance Standards for Cabinet X-Ray Systems (21 CRF 1020.40).
Emergency stop buttons at either end of the unit conform to ANSI standard B20.10 for Conveyor Safety. Cluster LED X-Ray "ON" indicators for lower maintenance. The electrical system conforms to applicable sections of IEC 348 for Electrical Safety and FCC Docket 20780 for electromagnetic capability. (top of page)
LETTER BOMB DETECTOR DV-3005 (top of page)
Used as a first line of defense again a mail bomb threat to detect the presence of known materials used in the making of mail-bombs in parcels. A very highly sensitive mail bomb scanner which works like a metal detector and is used to scan for the presence of small metallic objects which have been used in the making of mail-bombs, in parcels. It will detect the very smallest hearing aid battery (type A45) which has been used in mail bombs. Once a suspect package is detected it is then screened using an explosive detection equipment or x-ray scanner before it is opened.
Maximum Parcel Size: 15.50"Wide x 2.75" Height (Tunnel will accommodate a small UPS or FedEx Box.)
Overall Dimensions:
19.25"w x 15.25"h x 15.13"d
CCTV Systems | Emergency Phone Dialer | Loss Prevention Accessories | RF Systems Gates | Security Tags | Explosive Detectors | Inflatable Jump Features and Benefits | Component Parts | Inflatable Jump Inquiry Form |Hand Held Security Detectors | Web Site Hosting | Inflatable Jumpers |Line Item Sheet |Mailroom Explosive Scanner | Intelliscan Walk-Thru Metal Detector | Counterfeit Currency Detectors | Currency Counters Inquiry Form | Random Search Selector | Various Security Tags | Sensormatic Ultrapost System Package | Sensormatic Standalone System Package | Snowboards for Sale | Hand Held Security Wands | Conveyorized X-Ray Scanners (main page) | Portable X-Ray Scanners | Contact Us | Home Page
