GARRETT MS3500 -For other Garrett Walk Through Security Detectors including (Models CS5000, PD6500I, MT5500) Click Here
The highly rugged MS3500 walk-through unit is designed for use in jails, prisons and other high security facilities and offers maximum metal detection performance with minimum maintenance. It is built to withstand outside weather conditions and rough handling while maintaining Garrett's highest quality of metal detection.
Eight (8) touchpad controls perform all control functions on the MS 3500 and clearly report operation information with alphanumeric displays. Touchpads include: STANDBY. OPERATE, NUMERIC 2, VOLUME, + / -, PROGRAM and ACCESS.
The Movable Display Keypad can be positioned inside the locked and weatherproof Overhead Control Unit or attached to the exterior of the unit. When the STANDBY touchpad is pressed, the unit goes into a low Power Mode, and can be returned to full operation by pressing the OPERATE touchpad. Pressing the OPERATE touchpad initiates a comprehensive, automatic self-test and diagnostic program for instant fault detection. Faults are indicated on the LCD Display.
-4°F (-20° C) to +158°F (70°C); Humidity to 95% non-condensing
Fully automatic 100 to 240 VAC. Power supply meets UL, CSA, TUV and VDE standards
Weatherproofing / Foreign Object Protection Standards
Meets IP 55, IEC Standard. "Degrees of Protection provided by Enclosures," IEC 60529
All detection electronics can be secured behind a key-lock door in the Overhead Cap Assembly. Dual-level access codes require to or changes all sensitivity settings and detection programs; one level for use by supervisors in selecting programs and sensitivity and the other for initial set-up and overall control; non re-settable sequence code logs all changes made whenever sensitivity codes are accessed. Audible alarm reports any unauthorized attempt at access. All connectors are keyed to ensure proper connections.
Rugged, heavy-duty 3/32" armor aluminum plates with resilient corner caps for protection against maximum physical abuse.
Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
Multiple channels permit several MS 3500s and other Garrett detectors to operate simultaneously in close proximity
100% sensor coil Faraday shielding; RFI interference reduced with hardware; special Garrett built-in circuitry for noise suppression and ignoring x-ray monitors. Physical interference minimized by coil design and circuitry
Ready light indicates unit is operational; alarm lights and audible alarms are activated when the target amount of metal is detected.
Programs designed to eliminate the problem of dissimilar targets canceling each other.
Limited 24 months, parts and labor
Dimensions Interior Overall Exterior Control Panel
Shipping Box Side Panel
Width 30" (0.76 m) 50" (1.3 m) 26" (0.66 m) 26" (0.66m)
Height 80" (2 m) 89" (2.3 m) 56" (1.42 m) 95" (2.41m)
Depth 20" (0.50 m) 20" (0.50 m) 11" (0.28 m) 11" (0.28m)
For other Garrett Walk Through Security Detectors (Models CS5000, PD6500I, MT5500) Click Here
● Security Products You Can Count On! ●
© DC INC Inc..2011, All Rights Reserved.