 | CS5000
MSRP - $4,495.00 - Save!
With enhanced microprocessor-based technology, the CS 5000 provides improved detection
performance and increased operating flexibility. It offers many of the same features found
on our advanced walk-through units and can be used in virtually any security checkpoint
application. The CS 5000 is an affordable unit for the budget-conscious.
|
| Overhead Control Unit
LCD Display, alarm lights, LED bar graphs and control touch pad plus all wiring,
connections and electronics are integrated into a single lockable overhead compartment
which eliminates exposure of wires and external control box.
|
| Microprocessor Controlled
State of the art microprocessors ensure maximum sensitivity and flexible programming.
|
| Detection Field
Unique coil design offers multidimensional detection field with total uniformity both
horizontally and vertically. This design, plus a choice of three levels of ankle level
boost, eliminates traditional hot spots and weak signals. Target detection is precise
regardless of its location in the archway.
|
| Audible and Visual Alarms
Audible alarm and red LED Alarm Lights indicate metal has been detected. The Red LED
alarms light appears even when the audible alarm has been turned OFF. Green READY LIGHT
indicates the unit has full power and is ready for operation.
The Access Control panel will be used only by supervisory management personnel. It
permits changing the Program and Sensitivity codes and also is used to control such
functions as synchronization of multiple units, pulse frequency and tone. The unit further
secures control settings by maintaining a non re-settable sequence code that indicates any
attempt at seeking access to the settings. A tamper alarm sounds within 10 seconds after
the Access touch pad is pressed unless the proper access code is entered.
|
| Specifications:
|
| Operating Temperatures
-4°F (-20°C) to + 158°F (70°C); Humidity to 95% non-condensing
|
| Power
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; no rewiring, switching or
adjustments required. Power supply meets UL, CSA, TUV and VDE standards.
|
| Weatherproofing / Foreign Object Protection Standards
Meets IP 31, IEC Standard. "Degrees of Protection provided by Enclosures," CEI
529.
|
| Tamper-Proof
Dual-level access codes required to set or change all sensitivity settings and detection
programs; one level for use by supervisors in selecting programs and sensitivity and the
other for initial set-up and overall control; non re-settable sequence code logs all
attempts to access the settings. Audible alarm reports any unauthorized attempt at access
|
| Construction
Attractive scratch and mar-resistant laminate with resilient end caps; control panel and
cross members of heavy duty aluminum.
|
| Control Outputs
Solid state switches (low voltage AC or DC) for operating external alarms and control
devices.
|
| Traffic Counter
Built-in and re-settable with current reading easily available on LCD panel
|
| Synchronization
Multiple channels permit several CS 5000s and other Garrett detectors to operate
simultaneously in close proximity
|
| Interference Suppression
100% sensor coil Faraday shielding; special Garrett built-in circuitry for noise
suppression and ignoring x-ray monitors. Physical interference minimized by coil design
and circuitry
|
| Alarms
Green Ready light indicates unit is operational; Red alarm lights and audible alarm is
activated when the target amount of metal is detected.
|
| Infrared Sensor
Improves analysis of detection signal; increases throughput; helps eliminate "false
alarms" also provides accurate traffic counter.
|
| Masking
Programs designed to eliminate the problem of dissimilar targets canceling each other
|
| Warranty
Limited 24 months, parts and labor
|
| Dimensions Passageway Exterior Shipping
Width 30" (0.76 m) 35" (0.9 m) 33.5" (0.851 m)
Height 80" (2 m) 87" (2.2 m) 91.5" (2.324 m)
Depth 23" (0.58 m) 23" (0.58 m) 6.25" (0.159 m) |
| PD6500i
MSRP - $5,495.00
The PD6500i is the world's highest performing walk-through metal detector and leads the
industry with superior pinpoint technology and unmatched discrimination and sensitivity
features. Designed for maximum patron throughput without compromising safety, the PDi is
the walk-through of choice for security professionals worldwide.
|
| Easy Assembly
The PD 6500i's modular design allows for a quick and simple assembly of its 4 (four)
sub-assemblies using only 8 (eight) screws and 3 (three) internal electrical connections.
33 Distinct Pinpoint Detection Zones.
|
| The PD6500i offers exclusive multiple target pinpointing with 33 distinct zones for full
target coverage on the left, center and right side of the body from head to toe.
|
| Entry Pacing Lights
Smooth, efficient traffic flow with easy-to-view, eye-level pacing lights with
international "wait" and "proceed" symbols on the entrance side of
each panel.
|
| Overhead Control Unit
LCD Display, alarm lights, LED bar graphs and control touch pad plus all wiring,
connections and electronics are integrated into a single lockable overhead compartment
which eliminates exposure of wires and external control box.
|
| Multi-dimensional Coil Design
The PD 6500i's exclusive multi-dimensional coil design provides unmatched detection of
potentially lethal metal items such as guns, knives and other flat and rod-shaped weapons
regardless of location and orientation.
|
| Audible and Visual Alarms
Audible alarm and Visual LED lights signal when a target has been detected.
The PD6500i's Access Control Panel is designed for use by authorized personnel with
specific, multi-level security codes. It allows authorized users to change settings such
as detection Program and Sensitivity. Security of the detector's settings is maintained
with a non-reset able sequence code, which indicates every attempt at access to the
settings. A tamper alarm sounds within 10 seconds after the Access
Touch pad is pressed,
unless a proper access code is entered.
The PD6500i maintains all settings even when disconnected from power and does not require
recalibration each time the unit is turned OFF and back ON. No battery is required for
memory retention. While the unit is in operation, a self-test of all systems is performed
continuously with any failures or problems immediately reported on the LCD display.
|
| Specifications:
|
| Operating Temperatures
-4°F (-20°C) to + 158°F (70°C); Humidity: To 95% non-condensing
|
| Power
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; no rewiring, switching or
adjustments required. Power supply meets UL, CSA, TUV and VDE standards.
|
| Weatherproofing / Foreign Object Protection Standards
Meets IP 55, IEC Standard. "Degrees of Protection provided by Enclosures," IEC
529.
|
| Tamper-Proof
All settings are secured with a key lock and two levels of access codes. Further security
is accomplished with a cabinet lock which prevents unauthorized access to physical cables,
connectors and electronics.
|
| Construction
Attractive scratch and mar-resistant laminate. Detection Heads and Support: Heavy duty
aluminum.
|
| Control Outputs
Solid state switches (low voltage AC or DC) for operating external alarms and control
devices.
|
| Traffic Counter
Counter tracks the number of patrons that have passed through the detector, the number of
alarms and calculates alarm percentage.
|
| Synchronization
Dual channels and DSP circuitry allow several PD 6500i's to operate simultaneously in
close proximity to one another.
|
| Interference Suppression
Special Garrett DSP built-in circuitry eliminates effects from x-ray monitors and other
potential electrical interference sources.
|
| Programs
Sixteen (16) independent programs designed to meet all installation-specific requirements
including the new TSA Enhanced Metal Detector (EMD) System requirements for all U.S.
airports.
|
| Alarms
Audible tone and volume adjustable. Bright LED visual alarm.
|
| Target Pinpointing Lights
Thirty-three (33) distinct zones are displayed with two (2) independent columns of LED's
located on exit side of PD 6500i.
|
| Pacing Lights
International symbols
|
| Warranty
Limited 24 months, parts and labor
|
| Dimensions Interior Overall Exterior Shipping
Width 30" (0.76 m) 35" (0.9 m) 35.5" (0.9 m)
Height 80" (2 m) 87" (2.2 m) 92" (2.3 m)
Depth 23" (0.58 m) 23" (0.58 m) 6.5" (0.17 m)
Top of page |
MS3500
MSRP - $5,495.00
The highly rugged MS 3500 walk-through unit is designed for use in jails, prisons and
other high security facilities and offers maximum metal detection performance with minimum
maintenance. It is built to withstand outside weather conditions and rough handling while
maintaining Garrett's highest quality of metal detection.
Overhead Control Unit
The one-piece assembly houses all the detection electronics, protecting them from weather
and tampering. It is weatherproof and has a hinged door that locks with a key. Located on
the front of the Overhead, the LED indicator is protected by a clear Plexiglas window,
allowing high visibility of the READY LIGHT, ALARM LIGHT and BAR GRAPH LED.
| Microprocessor Controlled
State of the art microprocessors ensure maximum sensitivity and flexibility to program the
MS 3500 to fulfill various security applications.
|
| Audible and Visual Alarms
An audible alarm and red LED bar graph indicates the detection of metal. The LED bar graph
indicates the amplitude of the alarm signal.
|
| Detection Field
Unique coil design offers multidimensional detection field and three levels of ankle boost
sensitivity to ensure uniformity of screening in all security applications.
|
| Rugged Design
Rugged, heavy-duty 3/32" armor aluminum plates with resilient corner caps for
protection against maximum physical abuse. Construction design provides unit with maximum
installation stability as well as weather-proof operation.
|
| Eight (8) touch pad controls perform all control functions on the MS 3500 and clearly
report operation information with alphanumeric displays. Touch-pads include: STANDBY.
OPERATE, NUMERIC 2, VOLUME, + / -, PROGRAM and ACCESS.
|
| The Movable Display Keypad can be positioned inside the locked and weatherproof Overhead
Control Unit or attached to the exterior of the unit. When the STANDBY
touch pad is
pressed, the unit goes into a low Power Mode, and can be returned to full operation by
pressing the OPERATE touch pad. Pressing the OPERATE touch pad initiates a comprehensive,
automatic self-test and diagnostic program for instant fault detection. Faults are
indicated on the LCD Display.
|
| Specifications:
|
| Operating Temperatures
-4°F (-20° C) to +158°F (70°C); Humidity to 95% non-condensing
|
| Power
Fully automatic 100 to 240 VAC. Power supply meets UL, CSA, TUV and VDE standards
|
| Weatherproofing / Foreign Object Protection Standards
Meets IP 55, IEC Standard. "Degrees of Protection provided by Enclosures," IEC
60529
|
| Tamper-Proof
All detection electronics can be secured behind a key-lock door in the Overhead Cap
Assembly. Dual-level access codes require to or changes all sensitivity settings and
detection programs; one level for use by supervisors in selecting programs and sensitivity
and the other for initial set-up and overall control; non re-settable sequence code logs
all changes made whenever sensitivity codes are accessed. Audible alarm reports any
unauthorized attempt at access. All connectors are keyed to ensure proper connections.
|
| Construction
Rugged, heavy-duty 3/32" armor aluminum plates with resilient corner caps for
protection against maximum physical abuse.
|
| Control Outputs
Solid state switches (low voltage AC or DC) for operating external alarms and control
devices.
|
| Synchronization
Multiple channels permit several MS 3500s and other Garrett detectors to operate
simultaneously in close proximity
|
| Interference Suppression
100% sensor coil Faraday shielding; RFI interference reduced with hardware; special
Garrett built-in circuitry for noise suppression and ignoring x-ray monitors. Physical
interference minimized by coil design and circuitry
Alarms
Ready light indicates unit is operational; alarm lights and audible alarms are activated
when the target amount of metal is detected.
|
| Masking
Programs designed to eliminate the problem of dissimilar targets canceling each other.
|
| Warranty
Limited 24 months, parts and labor
|
| Dimensions Interior Overall Exterior Control Panel
Shipping Box Side Panel
Shipping Box
Width 30" (0.76 m) 50" (1.3 m) 26" (0.66 m) 26" (0.66m)
Height 80" (2 m) 89" (2.3 m) 56" (1.42 m) 95" (2.41m)
Depth 20" (0.50 m) 20" (0.50 m) 11" (0.28 m) 11" (0.28m)
|
| MT5500 Garrett Walk-Through Security Metal Detector
MSRP - $4,995.00
The MT 5500 is one of the world's most popular walk-though metal detectors because it
provides maximum throughput with unparalleled multi-dimensional scanning. The MT 5500
meets the demanding needs of security professionals worldwide who trust its ability to
maintain a high flow rate with minimal alarms.
|
| Easy Assembly
Garrett's MT 5500 is easily assembled with only 4 (four) pieces and 8 (eight) screws and
simple to follow instructions.
|
| Multi-Dimensional Scanning
The MT 5500 uses multi-dimensional scanning which ensures maximum throughput and uniform
screening with a minimum of false alarms. Multiple coil circuitry with dual alarm lights
inform operators on which side of the detector the target is located. With "hot
spots" eliminated, the unit's detection field is uniform throughout the archway and
false alarms are significantly minimized.
|
| Microprocessor Controlled
State of the art microprocessors ensure sensitivity and flexibility of programming with a
maximum of 200 distinct sensitivity levels in each program.
|
| Audible and Visual Alarms
Audible alarm with 3 distinct tones indicating target on the left, right or center of the
archway; two LED bar graphs related to the red Alarm Lights that report detectable metal
on either side of the unit or centered within it.
|
| Detection Field
Unique coil design offers multidimensional detection field with total uniformity both
horizontally and vertically. This design, plus a choice of three levels of ankle level
boost, eliminates traditional hot spots and weak signals. Target detection is precise
regardless of its location in the archway.
|
| Access Control Panel
The Access Control Panel is designed for use by authorized personnel with specific
security codes. It allows authorized users to change settings such as Program and
Sensitivity. Security of the detector's settings is maintained with a non-reset
able
sequence code, which indicates every attempt at access to the settings. A tamper alarm
sounds within 10 seconds after the Access touch pad is pressed unless a proper access code
is entered.
|
| The MT 5500 includes 20 standard programs, which are maintained in an electrically
erasable non-volatile memory, for the ultimate in security application versatility. The
unit maintains all settings even when disconnected from power and does not require
re-calibration when unit is turned OFF and back ON. No battery is required for memory
retention. When the unit is in operation, a self-test of all systems is performed
continuously with any failures or problems reported on the LCD display.
|
| Specifications:
|
| Operating Temperatures
-4°F (-20° C) to +158°F (70°C); Humidity to 95% non-condensing
|
| Power
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; no rewiring, switching or
adjustments required. Power supply meets UL, CSA, TUV and VDE standards
|
| Weatherproofing / Foreign Object Protection Standards
Meets IP 31, IEC Standard. "Degrees of Protection provided by Enclosures," CEI
529
|
| Tamper-Proof
Dual-level access codes required to set or change all sensitivity settings and detection
programs; one level for use by supervisors in selecting programs and sensitivity and the
other for initial set-up and overall control; non-reset able sequence code logs all
attempts to access the settings. Audible alarm reports any unauthorized attempt at access
|
| Construction
Attractive scratch and mar-resistant laminate with resilient end caps; control panel and
cross members of heavy duty aluminum.
|
| Control Outputs
Solid state switches (low voltage AC or DC) for operating external alarms and control
devices.
|
| Synchronization
Multiple channels permit several MT 5500s and other Garrett detectors to operate
simultaneously in close proximity
|
| Interference Suppression
100% sensor coil Faraday shielding; RFI interference reduced with hardware; special
Garrett built-in circuitry for noise suppression and ignoring x-ray monitors. Physical
interference minimized by coil design and circuitry
|
| Alarms
Ready light indicates unit is operational; alarm lights and audible alarms with variable
tones are activated when the target amount of metal is detected; location of alarm lights
on left and right side of display combined with variable tone indicates on which side of
the person the target is located.
|
| Infrared Sensor
Provides traffic counter, helps eliminate "false alarms and increases throughput
|
| Masking
Programs designed to eliminate the problem of dissimilar targets canceling each other.
|
| Warranty
Limited 24 months, parts and labor
|
| Dimensions Passageway Interior Overall Exterior Shipping
Width 30" (0.76 m) 35" (0.9 m) 33.5" (0.851 m)
Height 80" (2 m) 87" (2.2 m) 91.5" (2.324 m)
Depth 23" (0.57 m) 23" (0.57 m) 6.25" (0.159 m) |
(Will open in new window)
